MultiColumnSquare

From Seasteading
Jump to: navigation, search

WARNING: This is an official page, which means that you shouldn't edit it unless you work for TSI or have been explicitly told you can. Feel free to comment on the talk page, link to it, or use categories that it mentions (unless they contain the world "Official").


Description

This is much like a Dumbbell, except with multiple columns between the upper and lower decks. It looks sort of like this (large) image: Image:Semisub_upclose.jpg, except the columns are narrower, and the top deck sticks out a bit.

Detail

  • The top platform is a square, for ease of FractalTiling. If we have an edge unit of 10 meters, then we can build squares at 10x10, 20x20, 40x40, etc, and they can all tile together.
  • The columns are spars or open truss (whatever is cheapest) at each corner, platform above, submerged ballast/buoyancy below.
  • It is desirable to have at least 1 spar for protected access to underwater / surface.
  • The columns are set slightly in from the edge of the platform. This allows for LowerAndSneak.

Requirements Analysis

(As compared to a Dumbbell)

  • Safety
    • Should be safer, because multiple columns can support a platform with much less stress on the spars. (Still has shear problems if the whole structure tilts).
    •  ?? Also should be more stable ??
  • Cost - Unknown effect.
  • Pretty - Seems less pretty to me.
  • Modular - Can be locked together / tiled just like a dumbbell, except even more solidly, b/c we are not worried as much about stresses induced by combining platforms, because the multiple column design is solider and "squarer".
  • Cargo - Much easier to hoist things up, because we have wide support for the top platform, don't have to worry about unbalancing things.
  • Scalable - I think it scales fine both up and down.