Difference between revisions of "User:Vincecate/Tension circle house"

From Seasteading
Jump to: navigation, search
(Aquaculture)
(Future Models)
Line 89: Line 89:
  
 
I would like to build a model that was large enough for two people to float around in and
 
I would like to build a model that was large enough for two people to float around in and
then have a kite pull me and someone else [http://online.offshore.com.ai/balseros/|downwind alongside Anguilla].
+
then have a kite pull me and someone else [http://online.offshore.com.ai/balseros/ downwind alongside Anguilla].
 
Some kind of larger pipe for the outer circle seems like the way to go for this.  Probably this is
 
Some kind of larger pipe for the outer circle seems like the way to go for this.  Probably this is
 
in the 6-inch to 1 foot diameter range with the whole circle like 30 to 50 feet across.  Some surplus metal
 
in the 6-inch to 1 foot diameter range with the whole circle like 30 to 50 feet across.  Some surplus metal
pipe might be welded together.  But another way is some [http://plasticpipe.org/|large flexible plastic pipe].  
+
pipe might be welded together.  But another way is some [http://plasticpipe.org/ large flexible plastic pipe].  
 
For this kind of pipe a 1 foot diameter pipe can be bent with a 20 foot radius, so I could make a 40 foot circle.
 
For this kind of pipe a 1 foot diameter pipe can be bent with a 20 foot radius, so I could make a 40 foot circle.
 
The two ends are then heated and fused together.  It is a relatively inexpensive type of pipe and it does not take any fittings.  So the overall costs would be low.  For safety it might be good to have 3 or 7 smaller pipes bound together.  Or the pipe could be filled with foam.  Or both.
 
The two ends are then heated and fused together.  It is a relatively inexpensive type of pipe and it does not take any fittings.  So the overall costs would be low.  For safety it might be good to have 3 or 7 smaller pipes bound together.  Or the pipe could be filled with foam.  Or both.

Revision as of 13:17, 19 August 2008

House-wavebreak3.resized.jpg

Description

The idea is to use a tension circle to hold a house up. Having the flotation very wide makes it stable. The house does not need to be so far above the waves because it is floating up with the large waves. Does not need to go deep into the water because stability comes from the great width.

Detail

  • Material issues - concrete, foam inside wall. Since it does not go far below the water foam and concrete should be ok. With foam cracks in the concrete will not be fatal.
  • Tension members could be plastic rope or steel cable (note they are not in drawing above)
  • Inside of main column can be used for storage or general living space
  • Would use kite and sea anchor for movement on migration

Energy storage

If the outer circle were made from a large pipe, maybe 36-inch sched-40 stainless steel, it could be be used for compressed air energy storage. This would store plenty of energy for the average family. Could even be used to power motors for maneuvering in a port. But for extra safety it is nice to have the outer ring filled with foam. Might have the column below the house be a big pipe that was used for compressed air.

Requirements Analysis

  • Safety
    • It is very wide compared to boats and so should be very stable
    • Wall is filled with foam so essentially unsinkable
    • No active ballast controls so no chance of that going wrong
  • Comfort
    • Should have a gentle motion on normal days but significant response to large waves.
  • Cost
    • This should be one of the cheapest designs. It's very simple. Although it is as wide as a large cruise ship, most of the area is just cables over open space.
  • Pretty
    • Looks nice. Could cover over wires and put down grass so you had a real floating island. Could be very pretty.
  • Modular
    • Can make individual family sized units. Could have cable under a line of these so they floated together if you connected a sea anchor at one end and a large kite at the other.
  • Cargo
    • Since it floats up and down with waves like a boat, should be reasonable to dock a boat next to it. Probably have a small dock mounted on the wall so it could float up and down a bit relative to the wall. Need a walkway from house to where boat will dock.


  • Free Floating
    • Yes, could anchor also.
  • Scalable
    • Scales up or down in size (height, diameter).
  • Standards
  • Mobile
    • Could lift it up and put in on a barge for long distance transport. Would need something under the wall that was the height that the center column goes below the wall (maybe a couple containers stacked up). Could also use a floating dry dock for transport. For short distance slow travel it could be moved but use a lot of energy due to high drag shape.
  • Draft
    • Very shallow draft.

Video of 5-foot PVC model

First two are slowed down by a factor of 4 (should be 5 but don't see how to do that in Windows Movie Maker): <youtube v="oOYGjGbfmZI" />


<youtube v="D7ZAeB2lJas" />

Full speed <youtube v="mlsTXb_qyRA" />

Videos of 9-foot model tests

<youtube v="oLKEpt2wAS0" /> Initial launch.

<youtube v="HxUszZyNgXs" /> Compare the stability of the central PVC pipe in the model (where a house would be in the full sized version) to the stability of the larger and far more expensive real boat in the background.


<youtube v="omoaB5wLz6Y" />

If the real full scale ring was 144 feet across, it would be 16 times bigger than this model. The rules for scaling models state that time is faster in the model by the square-root of the scaling factor. So I have slowed down this video by a factor of 4 to see the time to move back and forth when a big wave comes. The 1 foot wall becomes a 16 foot wall, with 8 feet above water and 8 feet below in the full scale prototype.

Aquaculture

You could have net under the whole structure, attached to the outer circle, to make a place for aquaculture. Fresh water fish farms use automatic feeders where the fish bump something and then get a piece of food. With these no food is wasted. Don't know if salt water farms use these but I expect they could.

One possible problem is that moving through the water would be harder with a big net underwater.

Future Models

I would like to build a model that was large enough for two people to float around in and then have a kite pull me and someone else downwind alongside Anguilla. Some kind of larger pipe for the outer circle seems like the way to go for this. Probably this is in the 6-inch to 1 foot diameter range with the whole circle like 30 to 50 feet across. Some surplus metal pipe might be welded together. But another way is some large flexible plastic pipe. For this kind of pipe a 1 foot diameter pipe can be bent with a 20 foot radius, so I could make a 40 foot circle. The two ends are then heated and fused together. It is a relatively inexpensive type of pipe and it does not take any fittings. So the overall costs would be low. For safety it might be good to have 3 or 7 smaller pipes bound together. Or the pipe could be filled with foam. Or both.

Other drawings

Wavebreakhouse.jpg

Above was my first drawing in sketchup.

Vwb2.jpg

This was an artist impression but not what I had in mind.