Difference between revisions of "Stabilizers"

From Seasteading
Jump to: navigation, search
(New page: People use several different kinds of stabilizers for boats. Since stability is important for seasteads it is interesting to understand what options are available for boats. One method...)
 
(Gyro)
 
Line 1: Line 1:
 
 
People use several different kinds of stabilizers for boats.  Since stability is important for seasteads it is interesting to understand what options are available for boats.
 
People use several different kinds of stabilizers for boats.  Since stability is important for seasteads it is interesting to understand what options are available for boats.
  
Line 19: Line 18:
  
 
The [http://www.seakeeper.com/ Seakeeper gyro] uses a high speed gyro  spinning in a vacuum to stabilize a boat.  This can work while at anchor or underway.
 
The [http://www.seakeeper.com/ Seakeeper gyro] uses a high speed gyro  spinning in a vacuum to stabilize a boat.  This can work while at anchor or underway.
 +
 +
==See also==
 +
[[Gyroscope]]
 +
 +
 +
{{Structure Designs}}

Latest revision as of 22:43, 16 March 2010

People use several different kinds of stabilizers for boats. Since stability is important for seasteads it is interesting to understand what options are available for boats.

One method is to have fins in the water while going forward and have the fins be able to push on the water going past them. Another is to stop roll while at anchor. A third method is to use gyros.

Paravanes

These are what the boat used in "The Perfect Storm".

Active fin stabilizers

A computer controlling fins under the boat. As long as the boat is moving at a reasonable speed these can push on the water when turned at an angle by the computer.

At anchor stabilizers

These are often called "flopper stoppers". They are lowered into the water on booms on each side of the boat, like the paravanes. They drop into the water easily but resist being pulled up through the water. With one on each side they resist roll. Examples are rectangular hinge type or round type with rubber.

Gyro

The Seakeeper gyro uses a high speed gyro spinning in a vacuum to stabilize a boat. This can work while at anchor or underway.

See also

Gyroscope


Structure Designs
Structure requirements · PintStead · Spar · Semi-submersible · Submersible · Boats · Collaborative Design · Space Frame · Low Cost Seastead · Conex dumbbell · Docks ·
Materials
Materials · Thin Shell Ferrocement · Concrete · Geopolymer · Basalt
Engineering Data
Low Cost Wave Tank · Scale models · Wind Loads · Seasteading Software
Stability & Propulsion
Stability · Propulsion · Station Keeping · Gyroscopes · Stabilizers · Pneumatically Stabilized Platforms · Connections