Difference between revisions of "Thrusters"

From Seasteading
Jump to: navigation, search
(Mixers used in mobile aquaculture experiment)
(Flygt USA)
Line 8: Line 8:
  
 
* [http://www.flygtus.com/115917.asp main Flygt mixer page].   
 
* [http://www.flygtus.com/115917.asp main Flygt mixer page].   
* [http://www.flygtus.com/116191.asp] slow speed mixers, like used in mobile aquaculture
+
* [http://www.flygtus.com/116191.asp slow speed mixers] - like used in mobile aquaculture
 
* [http://www.flygtus.com/116151.asp compact mixers] - smaller diameters and cheaper
 
* [http://www.flygtus.com/116151.asp compact mixers] - smaller diameters and cheaper

Revision as of 05:34, 21 October 2008

Mixers used in mobile aquaculture experiment

Vince Cate contacted Cliff Goudey, Director, Offshore Aquaculture Engineering Center, Massachusetts Institute of Technology, Sea Grant College Program. Cliff used some slow speed mixers to make a self propelled aquaculture cage which was tested near Puerto Rico. Some nice video of the propellers on the cage. These mixers can produce thrust of 3.4 kN/760 lbs from power input of 4.6 kW/6.2 hp. With two of these mounted in fixed positions he was able to control the 62 foot diameter cage like a normal twin screwed boat at 0.5 to 0.6 knots. He said a propeller/motor unit costs around $20,000. He used Toshiba Model VFS11-2037PME variable frequency motor controllers which cost about $1,600 each.

These 8 foot diameter propellers are off the shelf equipment used for very efficient mixing in the waste-water treatment industry.

Flygt USA