User talk:Vincecate/Tension circle house

From Seasteading
< User talk:Vincecate
Revision as of 15:35, 17 July 2008 by Joep (talk | contribs) (Boat for comparison: new section)
Jump to: navigation, search

Idea for 30 foot PVC model

The wall does not really need to be a wall shape. Could be sections that were round like a pipe. In fact, I could make a large scale model using PVC pipe for the outside flotation. For 30 foot diameter probably use 16 sections of 5 foot pipe each. Pipe diameter is probably between 6 inches and 1 foot. Can use 22.5 degree joints to hold the 16 pipe sections together. Could make smaller one with 8 sections and 45 degree elbows. Vincecate 04:17, 4 June 2008 (UTC)

Putting in Youtube videos

Cool! I did not know how to do this. I have added the videos to my pages. I think we should remove that other page now. Vincecate 11:53, 4 June 2008 (UTC)

Ok, i'll remove it. It's a MediaWiki extension, it won't work on Wikipedia. Joep 11:59, 4 June 2008 (UTC)
Thanks much. Really makes the page better having the videos there. Vincecate 13:33, 4 June 2008 (UTC)

Hanging

If the walls were much higher (or when the cables do not start on top of the walls but from poles on top of the walls), you could hang the house, leaving some room for it to move (instead of being hold in place with tight cables like in the video). Would that add to stability? Joep 12:24, 4 June 2008 (UTC)

Not sure on that. Another idea is to make a big dome from the wall going up to the center and the house inside the top part of the dome. Then we might just need cables around the wall and no other cables. Vincecate 13:33, 4 June 2008 (UTC)

Boat for comparison

Hi Vince,

I looked at the slow motion video, and though the waves are relatively huge the house itself seems to move a lot. I was wondering if in a next video you could place a normal (scaled) boat next to the experiment for comparison? Joep 15:35, 17 July 2008 (UTC)