Difference between revisions of "Hydrothermal"
Bcmarshall (talk | contribs) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
==Hydrothermal Vents== | ==Hydrothermal Vents== | ||
| − | [[Image:Hydrothermal_vent.jpg|thumb|left|A [http:// | + | [[Image:Hydrothermal_vent.jpg|thumb|left|A [http://www.marshallhydrothermal.com/images/animated_smoker.gif], a type of hydrothermal vent]] |
| − | Hydrothermal vents typically spew out superheated fluid as high as 407 degrees Celsius at velocities ranging from 1-5 m/s. The vent openings are anywhere from a | + | Hydrothermal vents typically spew out superheated fluid as high as 407 degrees Celsius at velocities ranging from 1-5 m/s. The vent openings are anywhere from a few centimeters to more than a meter. The 1-5 m/s flow happens at depths of typically 2,500 m below sea level which is under pressure of about [http://www.scientificblogging.com/news/medusa_8500_feet_below_sea_level 200 atmospheres.] The vents are powered by the weight of seawater above forcing itself into fissures within the Earth's crust which is then returned to the ocean as a continuous, superheated geyser. |
==Marshall Hydrothermal Recovery System== | ==Marshall Hydrothermal Recovery System== | ||
| − | [http://www. | + | [http://www.marshallhydrothermal.com The Marshall Hydrothermal Recovery System] is the first [http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL&p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=8001784.PN.&OS=PN/8001784&RS=PN/8001784 patented] system designed to utilize underwater hydrothermal vents for energy, mining, and water desalination. It was designed by Bruce C. Marshall of California. |
In one proposed embodiment of the system, the vent would be capped off and the hydrothermal fluid ducted to the sea surface through highly insulated pipes. A floating platform or ship on the surface would then extract the heat out of the hydrothermal fluid and then use it for power generation. | In one proposed embodiment of the system, the vent would be capped off and the hydrothermal fluid ducted to the sea surface through highly insulated pipes. A floating platform or ship on the surface would then extract the heat out of the hydrothermal fluid and then use it for power generation. | ||
| − | In the closed loop system embodiment, a loop of insulated pipe would go from a floating platform or ship on the surface, down to the ocean floor, next to or in the hydrothermal vent, and would return to the ship or platform. A heat exchanger placed within the hydrothermal fluid flow would heat working fluid which would then be directed to the surface and used for power generation. The | + | In the closed loop system embodiment, a loop of insulated pipe would go from a floating platform or ship on the surface, down to the ocean floor, next to or in the hydrothermal vent flow, and would return to the ship or platform. A heat exchanger placed within the hydrothermal fluid flow would heat working fluid which would then be directed to the surface and used for power generation. The cooled clean working fluid would then be returned to the sea floor and be reheated. |
[[Image:Open_system.jpg|thumb|500px|right|The open version of the Marshall System]] | [[Image:Open_system.jpg|thumb|500px|right|The open version of the Marshall System]] | ||
[[Image:Closed_system.jpg|thumb|500px|right|The closed-loop version of the Marshall System]] | [[Image:Closed_system.jpg|thumb|500px|right|The closed-loop version of the Marshall System]] | ||
| Line 14: | Line 14: | ||
==Recoverable Energy== | ==Recoverable Energy== | ||
| − | A 3m opening and 3 m/s flow at 350 degrees Celsius would create a flow of 21,205.73 L/sec, which translates into 29,298.77 MW of raw power, calculated as the reciprocal of the amount of energy needed to raise that volume of water to that temperature. In comparison, the largest fission nuclear | + | A 3m opening and 3 m/s flow at 350 degrees Celsius would create a flow of 21,205.73 L/sec, which translates into 29,298.77 MW of raw power before any losses or inefficiencies are taken into account, calculated as the reciprocal of the amount of energy needed to raise that volume of water to that temperature. In comparison, the largest fission nuclear reactors at one plant in the U.S. provide [http://www.aps.com/general_info/AboutAPS_18.html 4,000 MW] of power. |
Computer modeling has shown the estimated producible energy after generator losses to be about 1 MW/10 cm2 pipe area. | Computer modeling has shown the estimated producible energy after generator losses to be about 1 MW/10 cm2 pipe area. | ||
| Line 20: | Line 20: | ||
==Advantages of Hydrothermal Energy over Other Alternative Sources== | ==Advantages of Hydrothermal Energy over Other Alternative Sources== | ||
| − | Hydrothermal energy is by far the densest and most highly concentrated natural source. Its energy content is estimated to be about 3. | + | Hydrothermal energy is by far the densest and most highly concentrated natural source. Its energy content is estimated to be about 3.3x10<sup>6</sup> more intense than solar radiation, and it is available 24 hours a day. By contrast, both wind and solar suffer from low density and intermittent operation. |
Hydrothermal energy offers the potential of replacing existing power plants, something that other renewable sources can not promise. | Hydrothermal energy offers the potential of replacing existing power plants, something that other renewable sources can not promise. | ||
==Deep-Sea Mining== | ==Deep-Sea Mining== | ||
| − | When using the open-loop configuration, the Marshall Hydrothermal Recovery System proposes to capture the ores that are being ejected from the core of the Earth before they can settle to become hydrothermal veins. Hydrothermal veins (hydrothermal vents of the geologic past) are the | + | When using the open-loop configuration, the Marshall Hydrothermal Recovery System proposes to capture the ores that are being ejected from the core of the Earth before they can settle to become hydrothermal veins. Hydrothermal veins (hydrothermal vents of the geologic past) are the original source of virtually all surface mines in the world. The ores are among the richest ever harvested, and because of the huge variety of metals and minerals in the fluid, mining promises to be as valuable as, or perhaps even more valuable than the energy that will be produced. |
==Water Desalination== | ==Water Desalination== | ||
| Line 32: | Line 32: | ||
==Technical challenges== | ==Technical challenges== | ||
| − | The depth of the hydrothermal vents at Juan de Fuca plate is about | + | The depth of the hydrothermal vents at Juan de Fuca plate is about 2500m, well within reach of conventional oil rigs. But other technical challenges remain. |
| − | + | Heat exchangers and highly insulated pipe must be designed and built specifically for the purposes intended. | |
| − | For the closed system | + | For the closed system careful calculations of heat loss and energy availability must be made prior to construction, and appropriate working fluid must be chosen. |
| − | Subsea construction is always difficult, and | + | Subsea construction is always difficult, and Marshall Hydrothermal, on track to build the first Marshall Hydrothermal Recovery System, will have to solve major primary engineering challenges on a scale of those faced when building the world’s first nuclear power plant. Materials and procedures must be utilized to deal with the chemical content of vent fluid, and selecting the best method of exchanging the heat and the best working fluid for a closed loop system will be an immediate concern. |
| + | |||
| + | The laying of submarine cable is a complex operation that will take several months to accomplish, but it is a well-understood and a relatively routine procedure. | ||
| − | |||
The most economical means of recovering the ores from the mining products must also be determined. | The most economical means of recovering the ores from the mining products must also be determined. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | {{Energy}} | |
Latest revision as of 01:05, 19 August 2013
Contents
Hydrothermal Vents
Hydrothermal vents typically spew out superheated fluid as high as 407 degrees Celsius at velocities ranging from 1-5 m/s. The vent openings are anywhere from a few centimeters to more than a meter. The 1-5 m/s flow happens at depths of typically 2,500 m below sea level which is under pressure of about 200 atmospheres. The vents are powered by the weight of seawater above forcing itself into fissures within the Earth's crust which is then returned to the ocean as a continuous, superheated geyser.
Marshall Hydrothermal Recovery System
The Marshall Hydrothermal Recovery System is the first patented system designed to utilize underwater hydrothermal vents for energy, mining, and water desalination. It was designed by Bruce C. Marshall of California.
In one proposed embodiment of the system, the vent would be capped off and the hydrothermal fluid ducted to the sea surface through highly insulated pipes. A floating platform or ship on the surface would then extract the heat out of the hydrothermal fluid and then use it for power generation.
In the closed loop system embodiment, a loop of insulated pipe would go from a floating platform or ship on the surface, down to the ocean floor, next to or in the hydrothermal vent flow, and would return to the ship or platform. A heat exchanger placed within the hydrothermal fluid flow would heat working fluid which would then be directed to the surface and used for power generation. The cooled clean working fluid would then be returned to the sea floor and be reheated.
Recoverable Energy
A 3m opening and 3 m/s flow at 350 degrees Celsius would create a flow of 21,205.73 L/sec, which translates into 29,298.77 MW of raw power before any losses or inefficiencies are taken into account, calculated as the reciprocal of the amount of energy needed to raise that volume of water to that temperature. In comparison, the largest fission nuclear reactors at one plant in the U.S. provide 4,000 MW of power.
Computer modeling has shown the estimated producible energy after generator losses to be about 1 MW/10 cm2 pipe area.
Advantages of Hydrothermal Energy over Other Alternative Sources
Hydrothermal energy is by far the densest and most highly concentrated natural source. Its energy content is estimated to be about 3.3x106 more intense than solar radiation, and it is available 24 hours a day. By contrast, both wind and solar suffer from low density and intermittent operation. Hydrothermal energy offers the potential of replacing existing power plants, something that other renewable sources can not promise.
Deep-Sea Mining
When using the open-loop configuration, the Marshall Hydrothermal Recovery System proposes to capture the ores that are being ejected from the core of the Earth before they can settle to become hydrothermal veins. Hydrothermal veins (hydrothermal vents of the geologic past) are the original source of virtually all surface mines in the world. The ores are among the richest ever harvested, and because of the huge variety of metals and minerals in the fluid, mining promises to be as valuable as, or perhaps even more valuable than the energy that will be produced.
Water Desalination
In the open-loop configuration, the Marshall Hydrothermal Recovery System allows the water component of the hydrothermal fluid to flash to steam, which can then be distilled and recovered as fresh water. The vast majority of the energy needed is provided by nature, but additional stages of purification may be needed.
Technical challenges
The depth of the hydrothermal vents at Juan de Fuca plate is about 2500m, well within reach of conventional oil rigs. But other technical challenges remain.
Heat exchangers and highly insulated pipe must be designed and built specifically for the purposes intended.
For the closed system careful calculations of heat loss and energy availability must be made prior to construction, and appropriate working fluid must be chosen.
Subsea construction is always difficult, and Marshall Hydrothermal, on track to build the first Marshall Hydrothermal Recovery System, will have to solve major primary engineering challenges on a scale of those faced when building the world’s first nuclear power plant. Materials and procedures must be utilized to deal with the chemical content of vent fluid, and selecting the best method of exchanging the heat and the best working fluid for a closed loop system will be an immediate concern.
The laying of submarine cable is a complex operation that will take several months to accomplish, but it is a well-understood and a relatively routine procedure.
The most economical means of recovering the ores from the mining products must also be determined.
| Energy |
|---|
| Hydrothermal · OTEC · Wave Power · Currents · Osmotic Power · Energy Storage · Micro-grid · Biofuel · Wind turbines · Kites · Photovoltaics · Nuclear |
![[1]](http://www.marshallhydrothermal.com/images/animated_smoker.gif){kind=link}