Difference between revisions of "Thrusters"
(→Flygt USA) |
(→Flygt USA) |
||
| Line 8: | Line 8: | ||
* [http://www.flygtus.com/115917.asp main Flygt mixer page]. | * [http://www.flygtus.com/115917.asp main Flygt mixer page]. | ||
| − | * [http://www.flygtus.com/116191.asp slow speed mixers] - | + | * [http://www.flygtus.com/116191.asp slow speed mixers] - larger diameters and most efficeint |
* [http://www.flygtus.com/116151.asp compact mixers] - smaller diameters and cheaper | * [http://www.flygtus.com/116151.asp compact mixers] - smaller diameters and cheaper | ||
Revision as of 05:35, 21 October 2008
Mixers used in mobile aquaculture experiment
Vince Cate contacted Cliff Goudey, Director, Offshore Aquaculture Engineering Center, Massachusetts Institute of Technology, Sea Grant College Program. Cliff used some slow speed mixers to make a self propelled aquaculture cage which was tested near Puerto Rico. Some nice video of the propellers on the cage. These mixers can produce thrust of 3.4 kN/760 lbs from power input of 4.6 kW/6.2 hp. With two of these mounted in fixed positions he was able to control the 62 foot diameter cage like a normal twin screwed boat at 0.5 to 0.6 knots. He said a propeller/motor unit costs around $20,000. He used Toshiba Model VFS11-2037PME variable frequency motor controllers which cost about $1,600 each.
These 8 foot diameter propellers are off the shelf equipment used for very efficient mixing in the waste-water treatment industry.
Flygt USA
- main Flygt mixer page.
- slow speed mixers - larger diameters and most efficeint
- compact mixers - smaller diameters and cheaper
