Difference between revisions of "User:Vincecate/Models/Multispar"
< User:Vincecate | Models
| Line 1: | Line 1: | ||
| − | |||
This model was sponsored by {{U|Joep}}. His support is greatly appreciated. | This model was sponsored by {{U|Joep}}. His support is greatly appreciated. | ||
[[Image:Multispare20lbs-cut.jpg]] | [[Image:Multispare20lbs-cut.jpg]] | ||
| + | |||
| + | This is a bit like [http://www.vbuoy.com/thesystem-testing.html Versa Buoy]. There are 4 legs of 4.5 feet each of 2 inch pipe. The X-shape platform is 1-inch pipe. Elastic cord connects each leg to the platform. Cord hsa a knot inside cap on then goes through platform pipe then another knot on top. So the legs are held to the platform but they can flex. | ||
| + | |||
| + | Tried 2.5 lbs steel weights from a weight set and these were too small, the legs floated out. Then tried 5 lbs steel weights and it floated too low in the water (picture above). It was very stable, just that the platform was hit by some waves. Plan is to use sand in plastic bags so that we can adjust the amount of weight used till it is right. | ||
Revision as of 03:28, 16 July 2008
This model was sponsored by Joep. His support is greatly appreciated.
This is a bit like Versa Buoy. There are 4 legs of 4.5 feet each of 2 inch pipe. The X-shape platform is 1-inch pipe. Elastic cord connects each leg to the platform. Cord hsa a knot inside cap on then goes through platform pipe then another knot on top. So the legs are held to the platform but they can flex.
Tried 2.5 lbs steel weights from a weight set and these were too small, the legs floated out. Then tried 5 lbs steel weights and it floated too low in the water (picture above). It was very stable, just that the platform was hit by some waves. Plan is to use sand in plastic bags so that we can adjust the amount of weight used till it is right.
