Difference between revisions of "User:Vincecate/AnguillaTestLocations"
(New page: ==Anguilla Test Locations== The test sites that I used and liked in Anguilla are: * [http://maps.google.com/?ie=UTF8&t=h&ll=18.258035,-63.02776&spn=0.002461,0.004136&z=18 Shoal Bay] - 20...) |
(No difference)
|
Revision as of 18:23, 2 February 2009
Anguilla Test Locations
The test sites that I used and liked in Anguilla are:
- Shoal Bay - 200 foot swim past reef to deep water
- Outside Island Harbor - Kayak 1/2 mile past small island and reef to very deep water
- Pier inside Island Harbor - Tripod on pier and swimming in water about 8 feet deep
I am thinking of getting a camera that can do 150 frames-per-second and has a 20x zoom. This is not a waterproof camera so I would need to shoot from a tripod on shore. Would like to be able to test models with long hanging ballasts and so want a place with deep water right next to a rocky shore but not too far from a beach so I can get in and out with a kayak to position models. Two places that might work are:
- south side of east end - beach on the left and deep water near rocky shore in upper right - on windward side of island so larger waves
- west of Shoal Bay - on protected side of island so waves will be smaller
- point between little bay and limestone bay - different sides of this point can have different sized waves, which could be handy. Can get high up so that when shooting out 200 feet you still have enough down angle. On downwind side of island.
The Canon that I used from the pier in previous experiments has a 4x zoom and video was usable 100 feet from pier and great at 50 feet. With a 20x zoom I should be in fine shape from this rocky shore.
If I have a PVC pipe sticking up from the model with every other inch of it black I will be able to measure movements and waves in the video using this for scale.
